Apexstone Soft Close Lid Support,Safety Lid Support,Soft Down Lid Support,Soft Close Lid Hinge33 lbs,Set of 2

#ad
#ad
Apexstonetek #ad - While if unfortunately you feel it's too weak, the measurements are 3 1/2 Inch /90 mm from the back of the lid, you can move the mounting point on the lid 20 mm079 inch towards the opposite direction of the hinges, OR you can move it on the cabinet 20 mm079 inch towards the back of the cabinet. We offer 1 year 100% satisfactory warranty, if unfortunately our SOFT DOWN LID GAS STRUT did not work well, please kindly contact us for exchange, refund or return.

Apexstone Soft Close Lid Support,Safety Lid Support,Soft Down Lid Support,Soft Close Lid Hinge33 lbs,Set of 2 #ad - As the installation, 7 5/8 inch/195 mm from the back of the cabinet, and 8 5/8 inch/220 mm from the bottom of the cabinet. Force:33 lbs150 n, length center-to-center: 8. 7 inch220 mm, extended Length Center-to-Center:14. 2 inch360 mm. Soft down the door/lid which the side length is between 10 and 30 Inch, the WEIGHT is between 10 and 30 Lbs.

. When you install it, the lid will lower gently--never smashing child's fingers Lids lower gently, ideal for soft CLOSING lid to prevent from slamming so that it won't smash kid's fingers. Perfect for various box/toy chest/toy box to prevent from smashing hands.

More information about Apexstonetek #ad

Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 1-1/2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 3' Long Pack of 1

#ad
#ad
S&S Hinges BA1003X36 #ad - Stainless steel 304 resists corrosion up to 1, 500 degrees F and is suitable for applications used in corrosive environments, though not as resistant to corrosion as stainless steel 316. The leaf is the flat metal portion of the hinge that extends laterally from the knuckle and revolves around the pin. A weldable material, stainless steel 304 is stronger than steel and aluminum.

This finished hinge is suited for applications such as cabinetry and piano lids where a polished hinge as opposed to a flat finished or unfinished hinge is a priority. The pin runs the length of the hinge holding the leaves together. The stainless steel 304 continuous hinge has countersunk holes and is suitable for surface-mounted applications requiring uninterrupted support along the full length of the pieces being joined, such as appliance doors, industrial kitchen equipment, and metal storage cabinets.

Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 1-1/2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 3' Long Pack of 1 #ad - The bright annealed finish gives this hinge a mirrorlike appearance and offers additional protection against corrosion. They are manufactured in a variety of materials and sizes, with or without holes, finished or unfinished, and can be cut to specific sizes. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance.

The range of motion for this hinge is 270 degrees from the folded position. The knuckle is the tubular part of the hinge through which the pin passes, and knuckle length is the measurement of an individual section.

More information about S&S Hinges BA1003X36 #ad


Similar products



Reliable Hardware Company RH-0540BK-2-A Set of 2 Chest Handle, Black

#ad
#ad
Bienz & Fowlks dba Reliable Hardware Company RH-0540BK-2-A #ad - Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum.

Reliable Hardware Company RH-0540BK-2-A Set of 2 Chest Handle, Black #ad - Countersunk holes for convenience when mounting. 4. 17'' w x 3. 00'' h. 16gauge plate /. 315'' diameter Bail. Chest handle, Black - Set of 2. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Black powder Coat Finish. 4 mounting holes. 196'' diameter.

More information about Bienz & Fowlks dba Reliable Hardware Company RH-0540BK-2-A #ad


Similar products



Apexstone 100N/22.5lb Gas Strut,Gas Spring,Lid Support,Lift Support,Lid Stay,Gas Props/Shocks,Set of 4

#ad
#ad
Apexstone CECOMINOD060390 #ad - 16gauge plate /. 315'' diameter Bail. We offer 1 year 100% satisfactory warranty, if unfortunately our soft open lid gaS STRUT did not work well, please kindly contact us for exchange, refund or return.4. 17'' w x 3. 00'' h. Pressure:100n/22. 5lb per strut;length hole center to hole center :9-11/16'';Travel:3-14/25'', Distance between ball mounts compressed: 6-1/8".

Lids soft open gently, Ideal for supporting the lid to keep it open. 4 mounting holes. 196'' diameter. Instructions Included, Screws Included. Package included: 4 x 100n gas struts and 20 x screws Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets.

Apexstone 100N/22.5lb Gas Strut,Gas Spring,Lid Support,Lift Support,Lid Stay,Gas Props/Shocks,Set of 4 #ad - Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum. Countersunk holes for convenience when mounting. Black powder Coat Finish. Support opens lids to a maximum angle of 100 degrees. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance.

Lids soft open gently, Ideal for supporting the lid to keep it open.

More information about Apexstone CECOMINOD060390 #ad


Similar products



Gizhome 100N /22lb Soft Close Lid Support, Safety Lift Support Gas Struts Gas Springs Gas Shocks for Toy Box, Soft Down Lid Stay, Soft Close Lid Hinge, Pack of 2

#ad
#ad
Gizhome #ad - Package included: 2 x Soft Close Lid Struts and 10 x Screws. Black powder Coat Finish. 4. 17'' w x 3. 00'' h. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Support opens lids to a maximum angle of 100 degrees. Perfect for various box/toy chest/toy box to prevent from smashing hands.

Pressure: 100 n/22 lb each hinge; travel: 3-14/25"; Distance Between Ball Mounts Compressed: 8-7/10'';. 4 mounting holes. 196'' diameter. Instructions Included, Screws Included. Pressure:100n/22. 5lb per strut;length hole center to hole center :9-11/16'';Travel:3-14/25'', Distance between ball mounts compressed: 6-1/8".

Lids soft open gently, Ideal for supporting the lid to keep it open. Features: use: designed for support on drop lids of desks, cabinets, industrial kitchen equipment, ideal for supporting the lid to keep it closed pressure: 100 N/22 lb each hinge; Travel: 3-14/25"; Distance Between Ball Mounts Compressed: 8-7/10''; Perfect for various box/toy chest/toy box to prevent from smashing hands Package included: 2 x Soft Close Lid Struts and 10 x Screws Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, easy to use Lids soft close gently, keeping the lid up, and metal storage cabinets.

Gizhome 100N /22lb Soft Close Lid Support, Safety Lift Support Gas Struts Gas Springs Gas Shocks for Toy Box, Soft Down Lid Stay, Soft Close Lid Hinge, Pack of 2 #ad - Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum. Countersunk holes for convenience when mounting. We offer 1 year 100% satisfactory warranty, please kindly contact us for exchange, if unfortunately our soft open lid gaS STRUT did not work well, refund or return.

More information about Gizhome #ad


Similar products



Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 3' Long Pack of 1

#ad
#ad
S&S Hinges #ad - 16gauge plate /. 315'' diameter Bail. 4. 17'' w x 3. 00'' h. Lids soft open gently, Ideal for supporting the lid to keep it open. Pressure:100n/22. 5lb per strut;length hole center to hole center :9-11/16'';Travel:3-14/25'', Distance between ball mounts compressed: 6-1/8". The bright annealed finish gives this hinge a mirrorlike appearance and offers additional protection against corrosion.

Black powder Coat Finish. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. They also vary by knuckle length, leaf thickness, pin diameter, and open width. The leaf is the flat metal portion of the hinge that extends laterally from the knuckle and revolves around the pin.

Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 3' Long Pack of 1 #ad - They are manufactured in a variety of materials and sizes, with or without holes, finished or unfinished, and can be cut to specific sizes.4 mounting holes. 196'' diameter. Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets.

Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum. Countersunk holes for convenience when mounting.

More information about S&S Hinges #ad


Similar products



Apexstone 100N/22.5lb Gas Struts,Gas Springs,Gas Strut,Lift Support,Gas Shocks,Lid Stay,Lid Support,Set of 4

#ad
#ad
Apexstone #ad - Black powder Coat Finish. We offer 1 year 100% satisfactory warranty, please kindly contact us for exchange, if unfortunately our soft open lid gaS STRUT did not work well, refund or return. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Support opens lids to a maximum angle of 100 degrees.

Pressure: 100 n/22 lb each hinge; travel: 3-14/25"; Distance Between Ball Mounts Compressed: 8-7/10'';. 16gauge plate /. 315'' diameter Bail. We offer 1 year 100% satisfactory warranty, please kindly contact us for exchange, if unfortunately our soft open lid gaS STRUT did not work well, refund or return. Use: designed for support on drop lids of desks, keeping the lid up, cabinets, easy to use.

Apexstone 100N/22.5lb Gas Struts,Gas Springs,Gas Strut,Lift Support,Gas Shocks,Lid Stay,Lid Support,Set of 4 #ad - Lids soft close gently, Ideal for supporting the lid to keep it closed. Lids soft open gently, Ideal for supporting the lid to keep it open. Package included: 4 x 100n gas struts and 20 x screws Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets.

Stainless steel 304 is corrosion resistant up to 1, 500 degrees F though less resistant to corrosion than stainless steel 316, weldable, and stronger than steel and aluminum. Countersunk holes for convenience when mounting. 4.

More information about Apexstone #ad


Similar products



Charcoal Gray, Slotted Piano Hinge, 36" L x 1-1/2" W

#ad
#ad
Rockler #ad - We offer 1 year 100% satisfactory warranty, if unfortunately our soft open lid gaS STRUT did not work well, please kindly contact us for exchange, refund or return. Use: designed for support on drop lids of desks, cabinets, keeping the lid up, easy to use. Lids soft close gently, Ideal for supporting the lid to keep it closed.

Black powder Coat Finish. And since the rich antique brass and antique copper finishes are applied at the end of production, there is minimal risk of marring during fabrication. 16gauge plate /. 315'' diameter Bail. Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets.

Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum. Countersunk holes for convenience when mounting. We offer 1 year 100% satisfactory warranty, if unfortunately our soft open lid gaS STRUT did not work well, please kindly contact us for exchange, refund or return.

Charcoal Gray, Slotted Piano Hinge, 36" L x 1-1/2" W #ad - Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum.

Countersunk holes for convenience when mounting.

More information about Rockler #ad


Similar products



Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 2" Open Width, 3/32" Pin Diameter, 1/2" Knuckle Length, 4' Long Pack of 1

#ad
#ad
S&S Hinges #ad - Instructions Included, Screws Included. Pressure:100n/22. 5lb per strut;length hole center to hole center :9-11/16'';Travel:3-14/25'', Distance between ball mounts compressed: 6-1/8". Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Continuous hinges, panels, also called piano hinges, provide support to run the full length of the doors, or pieces being joined together.

The knuckle is the tubular part of the hinge through which the pin passes, and knuckle length is the measurement of an individual section. The leaf is the flat metal portion of the hinge that extends laterally from the knuckle and revolves around the pin. Perfect for various box/toy chest/toy box to prevent from smashing hands.

Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 2" Open Width, 3/32" Pin Diameter, 1/2" Knuckle Length, 4' Long Pack of 1 #ad - A weldable material, stainless steel 304 is stronger than steel and aluminum. Lids soft open gently, Ideal for supporting the lid to keep it open. We offer 1 year 100% satisfactory warranty, please kindly contact us for exchange, if unfortunately our soft open lid gaS STRUT did not work well, refund or return.

Use: designed for support on drop lids of desks, keeping the lid up, cabinets, easy to use. Lids soft close gently, Ideal for supporting the lid to keep it closed. Pressure:100n/22. 5lb per strut;length hole center to hole center :9-11/16'';Travel:3-14/25'', Distance between ball mounts compressed: 6-1/8".

More information about S&S Hinges #ad


Similar products



AECOJOY Water Pressure Regulator Brass Lead Free, NH Thread for RV, Adjustable Plumbing with Guage

#ad
#ad
AECOJOY AE017 #ad - 3/4" water sources, nh threads, simply assemble to connect with city water connector, protects filter and hose from damage. Compatible with U. S. We offer 1 year 100% satisfactory warranty, if unfortunately our soft open lid gaS STRUT did not work well, please kindly contact us for exchange, refund or return.

Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, 500 degrees F though less resistant to corrosion than stainless steel 316, weldable, and stronger than steel and aluminum.

AECOJOY Water Pressure Regulator Brass Lead Free, NH Thread for RV, Adjustable Plumbing with Guage #ad - Countersunk holes for convenience when mounting. 16gauge plate /. 315'' diameter Bail. Aecojoy 2018 new version, lead free regulator come with a more durable pressure gauge to make the pressure information more clear. 3/4" water sources, simply assemble to connect with city water connector, NH thread for RV, protects filter and hose from damage.

Durable lead free brass, well under the NSF lead-free requirements of 025%. Adjust pressure up to 160 PSI contain oil. Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets.

More information about AECOJOY AE017 #ad


Similar products



National Hardware N147-165 V550 Chest Hinges in Zinc plated, 2 pack

#ad
#ad
National Hardware N147-165 #ad - Tight pin for more secure applications. Lids soft open gently, Ideal for supporting the lid to keep it open. Support opens lids to a maximum angle of 100 degrees. Perfect for various box/toy chest/toy box to prevent from smashing hands. Designed for chests, cabinets, storages boxes, etc. Manufactured with hot-rolled steel.

We offer 1 year 100% satisfactory warranty, please kindly contact us for exchange, if unfortunately our soft open lid gaS STRUT did not work well, refund or return. Use: designed for support on drop lids of desks, cabinets, keeping the lid up, easy to use. Lids soft close gently, Ideal for supporting the lid to keep it closed.

National Hardware N147-165 V550 Chest Hinges in Zinc plated, 2 pack #ad - 4 mounting holes. 196'' diameter. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. With over a century of service National is committed to maintaining the highest level of product quality, innovation and manufacturing technology. Instructions Included, Screws Included.

Zinc plating offers corrosion resistance for all of your functional hardware needs. Lids soft open gently, Ideal for supporting the lid to keep it open.

More information about National Hardware N147-165 #ad


Similar products

Scroll to top