Torin Big Red Steel Jack Stands: Double Locking, 3 Ton Capacity, 1 Pair


Torin T43002A - The 3 ton 6, 000 lb capacity jacks are sold as a pair, help support your vehicle and are designed and dedicated to keeping you safe. Constructed of high-grade steel with a welded frame, these stands are built for quality and durability. Single piece, self-locking, multi-position, forged iron ratchet bar provides precise adjustments.

Meets asme safety standards and includes a limited 1 year manufacturer warranty. Double locking jack stands that are sold as a pair; Height ranges from 11-1/4" to 16-3/4" with a 3 Ton 6, 000 lb capacity each. Each stand is equipped with a double lock protection feature that increases safety by 200%. Saddle has a large surface area that provides better contact with the load being supported; Large foot base size of 7-11/16" by 6-7/8".

Torin Big Red Steel Jack Stands: Double Locking, 3 Ton Capacity, 1 Pair - This unit meets asmE safety standards and includes a limited 1 year manufacturer warranty. The large saddle surface area provides better contact with the load being supported and the single piece, self-locking, multi-position, forged iron ratchet bar provides precise adjustments. Locking rack and pawl gives the security and stability where you need it the most.

. Equipped with a double-lock protection feature, increasing safety by 200%. The torin big red steel double locking jack stands are a must have necessity in any garage.

More information about Torin T43002A

Arcan XL20 Black Service Jack


Arcan XL20 - Lift capacity tons : 2 Compact design with all the versatility of a full size jack. This model passes the 2009 asme PALD standard, which is the industry's leading safety regulation for lifting equipment. 3inch. Service jack. Lift height 3 1/2 Inches. Max. Safety valve prevents overloading. Lift height 18 1/2 inches plies with the ASME PALD 2009 standard.

The arcan true low profile design allows users to get under almost any vehicle to lift and comes at a significantly lower cost compared to other models in the market. Includes 2-piece, 45. Handle with bumper pad. Universal joint release mechanism provides precise control. The arcan jack is a sleek, low profile, durable, and long lasting 2T steel service jack capable of taking on any job for professionals or weekend warriors.

Arcan XL20 Black Service Jack - It is constructed out of high quality heavy duty steel. Dual pump for rapid lifting. Min.

More information about Arcan XL20


Similar products



Torin Big Red Hydraulic Trolley Floor Jack: SUV / Extended Height, 3 Ton Capacity


Torin T83006 - It is constructed out of high quality heavy duty steel. Lift height 18 1/2 inches plies with the ASME PALD 2009 standard. Heavy-duty floor jack with an extra-long neck. 3 ton capacity. Service jack. Dual pump for rapid lifting. 3inch. Lift range is 6" to 21". Includes 2-piece, 45. Lift height 3 1/2 Inches. Extra long neck saves time and makes it easier to lift higher vehicles.

Lifting range 5-7/8 inches to 17-1/4 inches. 360-degree swivel casters for easy mobility. Safety valve prevents overloading. Max. The extra long neck saves time and makes it easier to lift higher vehicles. Handle with bumper pad. Universal joint release mechanism provides precise control. Min. Great floor jack for trucks and SUV's.

Torin Big Red Hydraulic Trolley Floor Jack: SUV / Extended Height, 3 Ton Capacity - 3 ton suv floor jack is a great floor jack for trucks and SUV's, with a capacity of 3 tons. Safety bypass feature prevent overloading Compact design with all the versatility of a full size jack.

More information about Torin T83006


Similar products



FloTool 11930MI Heavy Duty Wheel Chock, 2 Pair


Hopkins 11930MI - Driven by innovative, no-mess product solutions, whether you’re changing your oil, or checking all your automotive fluid levels, topping off the antifreeze, FloTool has the right application. Extra long neck saves time and makes it easier to lift higher vehicles. Lifting range 5-7/8 inches to 17-1/4 inches.

3inch. Heavy-duty floor jack with an extra-long neck. Handle with bumper pad. Universal joint release mechanism provides precise control. Dual pump for rapid lifting. Min. 3 ton capacity. Prevents tires from rolling. Includes two chocks. Safety valve prevents overloading. Flotool, by hopkins manufacturing, offers the most comprehensive and highest quality offering of fluid handling products.

FloTool 11930MI Heavy Duty Wheel Chock, 2 Pair - Constructed of heavy duty resin material for ultimate durability and long-lasting usage. It is constructed out of high quality heavy duty steel. Lift height 18 1/2 inches plies with the ASME PALD 2009 standard. Great floor jack for trucks and SUV's. Stackable, nestable design for easy and convenient storage.

More information about Hopkins 11930MI


Similar products



Pack of 2 - YM W4194 Solid Rubber Wheel Chock with Handle, 8-3/4" Length, 4" Width, 6" Height


YM FBA_W4194-PK2 - Lift height 18 1/2 inches plies with the ASME PALD 2009 standard. Unique built-in rubber handle for easy transport. This durable, solid rubber wheel chock designed for use with heavy-duty loads. This rubber wheel chock with handle allows for fast and easy placement of the tire. Service jack. Safety valve prevents overloading.

Compact design with all the versatility of a full size jack. Rubber resists tearing, abrasion, ozone weathering. Extra long neck saves time and makes it easier to lift higher vehicles. Lifting range 5-7/8 inches to 17-1/4 inches. Max. Constructed of heavy duty resin material for ultimate durability and long-lasting usage.

Pack of 2 - YM W4194 Solid Rubber Wheel Chock with Handle, 8-3/4" Length, 4" Width, 6" Height - Stackable, nestable design for easy and convenient storage. They smell strong of rubber and it goes away after leaving them outside for weeks. Constructed of reinforced rubber to provide a sure grip on virtually any surface. Includes 2-piece, 45. It is constructed out of high quality heavy duty steel. 360-degree swivel casters for easy mobility.

More information about YM FBA_W4194-PK2


Similar products



Seven Sparta Jack Pad Adapter for Jack Stand 2-3 Ton Universal Rubber Slotted Frame Rail Pinch welds Protector 2 Pack


Seven Sparta - Safety valve prevents overloading. Service jack. If you're dissatisfied with your purchase for any reason, contact us for a replacement or refund. Best protection for your car undercarriage: Seven Sparta jack pad adapter is a great protector to prevent your frame rail, specifically pinch welds from bending or scratching while using with a car jack stand.

Maximum load bearing 3 ton: made of heavy duty construction and durable rubber material, Only for 2-3 ton jack stand. Perfect cushion design: jack pad adapter is designed to be sturdy enough to support your car while soft enough to resist pressure for your jack stand. Universal: the jack pad adapter fits most jacks and vehicles and can work great with jack stand, specifically compatible with Torin Big Red T43002.

Seven Sparta Jack Pad Adapter for Jack Stand 2-3 Ton Universal Rubber Slotted Frame Rail Pinch welds Protector 2 Pack - No-risk purchase! unconditional 30-day money-back guarantee. Size:  length: 63mm width: 44mm hight: 50mm Groove depth: 17mm Please check dimensions and ensure fitment to your jack stand and vehicle. Unique built-in rubber handle for easy transport. 360-degree swivel casters for easy mobility. Safety device to use with ramps or other lifting devices.

Extra long neck saves time and makes it easier to lift higher vehicles. Lifting range 5-7/8 inches to 17-1/4 inches.

More information about Seven Sparta


Similar products



TEKTON 24335 1/2" Drive Click Torque Wrench 10-150'.-Lb./13.6-203.5 Nm


Michigan Industrial Tools 24335 - Extra long neck saves time and makes it easier to lift higher vehicles. Lifting range 5-7/8 inches to 17-1/4 inches. Max. Built for consistent performance and years of dependable service, the mechanical design doesn't need batteries, and the allsteel construction has no plastic parts to break or wear out. Important: this wrench is shipped precalibrated and ready to use.

Great floor jack for trucks and SUV's. Simple and easy to use, this wrench has a reversible ratcheting head that drives fasteners in both directions and measures torque in the clockwise direction. Stackable, nestable design for easy and convenient storage. Heavy-duty floor jack with an extra-long neck. To help maintain calibration, store at its lowest setting of 10 ft.

TEKTON 24335 1/2" Drive Click Torque Wrench 10-150'.-Lb./13.6-203.5 Nm - Lb. 13. 6 nm when not in use. To measure torque, set the desired value on the handle scale foot pounds or Newton meters and begin tightening the fastener. High-contrast dual-range scale is easy to read, even in low light. 3 ton capacity.

More information about Michigan Industrial Tools 24335


Similar products



3.5 Ton Capacity - Blackhawk B6350 Black/Red Fast Lift Service Jack


Blackhawk B6350 - Great floor jack for trucks and SUV's. Blackhawk b6350 service jack also features the built-in internal safety valve and vent plug to ensures the safe operation. Extra long neck saves time and makes it easier to lift higher vehicles. Lifting range 5-7/8 inches to 17-1/4 inches. Lifting range: 5. 5 inches - 22 inches.

Unique built-in rubber handle for easy transport. Safety valve prevents overloading. 3inch. Includes two chocks. 3½ton 7, 000 Lbs. Lift capacity - fast lifting technology - heavy duty steel construction & Swivel Saddle - Built-In Safty Valve and Bypass Device Blackhawk B6350 Service Jack is backed by the full one year warranty from the date of the purchase.

3.5 Ton Capacity - Blackhawk B6350 Black/Red Fast Lift Service Jack - Prevents tires from rolling. Stackable, nestable design for easy and convenient storage. Includes 2-piece, 45. Not for commercial use. Best protection for your car undercarriage: Seven Sparta jack pad adapter is a great protector to prevent your frame rail, specifically pinch welds from bending or scratching while using with a car jack stand.

Maximum load bearing 3 ton: made of heavy duty construction and durable rubber material, Only for 2-3 ton jack stand. Perfect cushion design: jack pad adapter is designed to be sturdy enough to support your car while soft enough to resist pressure for your jack stand.

More information about Blackhawk B6350


Similar products



TEKTON 15356 1/2-Inch Drive by 24-Inch Breaker Bar


Michigan Industrial Tools 15356 - Durable all-steel construction has no plastic parts to break or wear out. Unique built-in rubber handle for easy transport. Reversible ratchet head drives in both directions and measures torque in clockwise direction. Handle with bumper pad. Universal joint release mechanism provides precise control. Constructed of heavy duty resin material for ultimate durability and long-lasting usage.

Made from high-quality forged and hardened chrome vanadium steel, this tough guy is built for a challenge and features a polished chrome plated finish that will protect and look great for years. If you're unsatisfied with this item for any reason, we'll immediately refund your purchase price. Wrench emits click that can be heard and felt when the preset value is reached.

TEKTON 15356 1/2-Inch Drive by 24-Inch Breaker Bar - Spring-loaded ball bearing retains sockets. Ships pre-calibrated to +/- 4% accuracy and ready to use. 180-degree, chrome moly flex head lets you work at any angle. Min. Forged and hardened chrome vanadium steel construction. Prevents tires from rolling.

More information about Michigan Industrial Tools 15356


Similar products



MaxxHaul 2 pack 70472 Solid Rubber Heavy Duty Black Wheel Chock, 8" Long x 4" Wide x 6" high-2 Pack, 2 pack


MaxxHaul Towing Products 70472 - Constructed of heavy duty resin material for ultimate durability and long-lasting usage. Min. Safety valve prevents overloading. This durable, solid rubber wheel chock designed for use with heavy-duty loads. Best protection for your car undercarriage: Seven Sparta jack pad adapter is a great protector to prevent your frame rail, specifically pinch welds from bending or scratching while using with a car jack stand.

Maximum load bearing 3 ton: made of heavy duty construction and durable rubber material, Only for 2-3 ton jack stand. Perfect cushion design: jack pad adapter is designed to be sturdy enough to support your car while soft enough to resist pressure for your jack stand. Universal: the jack pad adapter fits most jacks and vehicles and can work great with jack stand, specifically compatible with Torin Big Red T43002.

MaxxHaul 2 pack 70472 Solid Rubber Heavy Duty Black Wheel Chock, 8" Long x 4" Wide x 6" high-2 Pack, 2 pack - No-risk purchase! unconditional 30-day money-back guarantee. Non-slip rubber bottom maximizes the grip when vehicle is parked on the chock. Designed to perform better than plastic or resin-made wheel chocks. Durable all-steel construction has no plastic parts to break or wear out. Reversible ratchet head drives in both directions and measures torque in clockwise direction.

Prevents tires from rolling. Stackable, nestable design for easy and convenient storage.

More information about MaxxHaul Towing Products 70472


Similar products



DUTISON Jack Pads for Jack Stands, Rubber Pads for High Lift Steel Jack Stands/Car Jacks Compatible with Torin Big Red T43002-2 Pack


DUTISON 5559006473 - Includes two chocks. It is constructed out of high quality heavy duty steel. Often times for vehicles too low or in an emergency situation the factory side jack points need to be utilized. 3 ton capacity. Pad dimensions length: 63mm height: 50mm width: 44mm Groove Depth: 17mm Package: Jack Pad×2 Compact design with all the versatility of a full size jack.

Not for commercial use. Heavy-duty floor jack with an extra-long neck. Forged and hardened chrome vanadium steel construction. Polyurethane is too soft to harm your vehicle's metal yet rigid enough to support it. Dual pump for rapid lifting. Lift height 18 1/2 inches plies with the ASME PALD 2009 standard. Stackable, nestable design for easy and convenient storage.

DUTISON Jack Pads for Jack Stands, Rubber Pads for High Lift Steel Jack Stands/Car Jacks Compatible with Torin Big Red T43002-2 Pack - Lightweight yet durable enough to keep almost any vehicle or trailer in place. It will prevent your frame rails and pinch welds from bending when using a Jack to lift your car, can also protect painted or coated suspensions components. Perfect design】the rubber pad adds extra grip when raising the car and reduce slipping, it is stable and suitable for any type of body and Jack like Unitec, Michelin etc.

. Friendly note: Please verify dimensions and ensure fitment to your vehicle.

More information about DUTISON 5559006473


Similar products

Scroll to top